Quick view Combination spanner 14 mm ∙ Acc. to DIN 3113 Form B, ISO 3318, ISO 7738 ∙ Ring 10° offset from shaft, extra strong rings but thin wall ∙ Sizes 5 and 5.5 mm with hexagon ring, up from size 6 mm with UD profile ∙ GEDORE... Compare
Quick view Combination spanner 17 mm ∙ Acc. to DIN 3113 Form B, ISO 3318, ISO 7738 ∙ Ring 10° offset from shaft, extra strong rings but thin wall ∙ Sizes 5 and 5.5 mm with hexagon ring, up from size 6 mm with UD profile ∙ GEDORE... Compare
Quick view Combination spanner 1/4" ∙ Ring 10° offset from shaft ∙ GEDORE vanadium steel 31CrV3, chrome-plated Compare
Quick view Combination spanner, extra long 8 mm ∙ Similar to DIN 3113 ∙ Ring 15° offset from shaft, with UD profile ∙ Shaft made in girder pattern ∙ GEDORE vanadium steel 31CrV3, chrome-plated Compare
Quick view Combination spanner 6 mm ∙ Acc. to DIN 3113 Form A, ISO 3318, ISO 7738 ∙ Ring 15° offset from shaft, shaft in girder pattern ∙ Sizes 3 to 5.5 with hexagon ring, up from size 6 with UD profile ∙ GEDORE vanadium steel... Compare
Quick view Combination spanner 3/8" ∙ Ring 10° offset from shaft ∙ GEDORE vanadium steel 31CrV3, chrome-plated Compare
Quick view Combination spanner, extra long 16 mm ∙ Similar to DIN 3113 ∙ Ring 15° offset from shaft, with UD profile ∙ Shaft made in girder pattern ∙ GEDORE vanadium steel 31CrV3, chrome-plated Compare
Quick view Combination spanner 8 mm ∙ Acc. to DIN 3113 Form B, ISO 3318, ISO 7738 ∙ Ring 10° offset from shaft, extra strong rings but thin wall ∙ Sizes 5 and 5.5 mm with hexagon ring, up from size 6 mm with UD profile ∙ GEDORE... Compare
Quick view Combination spanner 10 mm ∙ Acc. to DIN 3113 Form B, ISO 3318, ISO 7738 ∙ Ring 10° offset from shaft, extra strong rings but thin wall ∙ Sizes 5 and 5.5 mm with hexagon ring, up from size 6 mm with UD profile ∙ GEDORE... Compare
Quick view Combination spanner 9 mm ∙ Acc. to DIN 3113 Form B, ISO 3318, ISO 7738 ∙ Ring 10° offset from shaft, extra strong rings but thin wall ∙ Sizes 5 and 5.5 mm with hexagon ring, up from size 6 mm with UD profile ∙ GEDORE... Compare
Quick view GEDORE Reversible Ratchet Wrench 13 mm ∙ With same spanner size each end, 13° offset on ring end ∙ UD-profile ∙ Working angle: 7° from 8 to 15 mm and 6° from 16 to 24 mm ∙ For ratchet loosening and fast tightening, with lever change ∙... Compare
Quick view Combination Wrench 5.5 mm ∙ Acc. to DIN 3113 Form B, ISO 3318, ISO 7738 ∙ Ring 10° offset from shaft, extra strong rings but thin wall ∙ Sizes 5 and 5.5 mm with hexagon ring, up from size 6 mm with UD profile ∙ GEDORE... Compare
Quick view GEDORE Reversible Ratchet Wrench 19 mm ∙ With same spanner size each end, 13° offset on ring end ∙ UD-profile ∙ Working angle: 7° from 8 to 15 mm and 6° from 16 to 24 mm ∙ For ratchet loosening and fast tightening, with lever change ∙... Compare
Quick view Socket 1/2" 36 mm ∙ Acc. to DIN 3124, ISO 2725-1 ∙ Square drive as per DIN 3120 - C 12.5, ISO 1174, with ball retaining groove ∙ Hand-operated, knurled grip ∙ GEDORE vanadium steel 31CrV3, polished, chrome-plated... Compare
Quick view GEDORE Punch Pin 1.5 mm ∙ Acc. to DIN 6450 ∙ Chrome-molybdenum-vanadium air hardening steel 45CrMoV7 ∙ Carefully hardened and tempered along the full length ∙ Striking heads inductively tempered ∙ Working edge... Compare
Quick view GEDORE Ratchets 1/4" 127 mm ∙ Used throughout industry and the automotive world - and as well in confined spaces ∙ Acc. to DIN 3122, ISO 3315 ∙ Small, drop shaped head for confined areas ∙ Fine-toothed (60 teeth), with lever... Compare
Quick view GEDORE Reversible Ratchet Wrench 17 mm ∙ With same spanner size each end, 13° offset on ring end ∙ UD-profile ∙ Working angle: 7° from 8 to 15 mm and 6° from 16 to 24 mm ∙ For ratchet loosening and fast tightening, with lever change ∙... Compare
Quick view GEDORE Torque Wrench TORCOFIXK 1/4" 2-25 Nm Use: ∙ Controlled screw tightening in the most widely used range of 1 - 850 N·m / 0.75 - 630 lbf·ft (guide for screws M3-6.9 to M24-8.8, M30-5.6) ∙ Adjustable, releasing and sturdy tubular torque... Compare
Quick view GEDORE Reversible Ratchet Wrench 10 mm ∙ With same spanner size each end, 13° offset on ring end ∙ UD-profile ∙ Working angle: 7° from 8 to 15 mm and 6° from 16 to 24 mm ∙ For ratchet loosening and fast tightening, with lever change ∙... Compare
Quick view Screwdriver bit socket 3/8", long 10 mm ∙ Acc. to DIN 7422 ∙ Square drive as per DIN 3120 - C 10, ISO 1174, with ball retaining groove ∙ Hand-operated, knurled grip ∙ Chrome-plated ∙ With pressed-in pin in GEDORE vanadium special... Compare
