SKANA

  • Tellerfeder aus Metall - 1

    Metal disc spring

    SKANA Spring – replacement part for equipmentTechnical dataOutside Ø: 35.0 mmBore Ø: 9.9 mmThickness: 4.5 mmSafetyFor safe installation and proper operation, please observe:the manufacturer's...
  • Faltenbalg 210 mm passend für SNAPPER - 1

    Bellow 210 mm suitable for SNAPPER

    Bellows 21.0 cm suitable for e.g. the following device(s): SNAPPER: Mower with rear engine 25''/28''/30''/33''To determine the exact spare part, please use the original spare part drawings of the...
  • Gaszug passend für HUSQVARNA - 1

    Throttle cable suitable for HUSQVARNA

    hrottle cable suitable for e.g. the following device(s): HUSQVARNA: 351To determine the exact spare part, please use the original spare part drawings of the corresponding device!Please be sure to...
  • Kupplungszug passend für MARINA - 1

    Clutch cable suitable for MARINA

    SKANA Clutch Cable – replacement part for equipmentCompatibilityThis item is suitable for equipment from MARINA (please check type and serial number).SafetyFor safe installation and proper operation,...
  • Gashebel für Freischneider - 1

    Throttle lever for brush cutter

    SKANA Throttle Lever – replacement part for equipmentTechnical dataTube Ø: 26 mmSwitch: ON/OFFSafetyFor safe installation and proper operation, please observe:the manufacturer's original installation...
  • Zughebel  - 1

    Throttle Lever

    SKANA Control Handle – replacement part for equipmentTechnical dataTube Ø: 26 mmSwitch: ON/OFFSafetyFor safe installation and proper operation, please observe:the manufacturer's original installation...
  • Gashebel für Freischneider - 1

    Throttle lever for brush cutter

    SKANA Throttle Lever – replacement part for equipmentTechnical dataTube Ø: 19 mmSwitch: ON/OFFSafetyFor safe installation and proper operation, please observe:the manufacturer's original installation...
  • Zughebel  - 1

    Throttle Lever

    SKANA Control Handle – replacement part for equipmentTechnical dataTube Ø: 24 mmSwitch: ON/OFFSafetyFor safe installation and proper operation, please observe:the manufacturer's original installation...
  • Gashebel für Freischneider - 1

    Throttle lever for brush cutter

    SKANA Throttle Lever – replacement part for equipmentTechnical dataTube Ø: 24 mmSwitch: ON/OFFSafetyFor safe installation and proper operation, please observe:the manufacturer's original installation...
  • Kupplungszug passend für HAYTER - 1

    Clutch cable suitable for HAYTER

    SKANA Clutch Cable replaces 3960 - Longueur câble: 1495mm Longueur gaine: 1400mm – replacement part for equipmentCompatibilityThis item is suitable for equipment from HAYTER (please check type and...
  • Kupplungszug passend für ARIENS 6900012 - 1

    Clutch Cable suitable for ARIENS 6900012

    Clutch cable (auger drive) suitable for ARIENS 6900012 Suitable for the following devices: ARIENS snow blower: 926LE 11528LE 1128LE 1332LE 926DLE 1328DLE ST926LE 1332LE To determine the exact...
  • Kupplungszug passend für HAYTER - 1

    Clutch cable suitable for HAYTER

    Clutch cable suitable for e.g. the following device(s): HAYTER: 56To determine the exact spare part, please use the original spare part drawings of the corresponding device!Please be sure to follow...
  • Kupplungszug passend für ARIENS 6900019 - 1

    Clutch cable suitable for ARIENS 6900019

    Clutch cable suitable for ARIENS 6900019 To determine the exact spare part, please use the original spare part drawings of the corresponding appliance! Please be sure to observe the installation and...
  • Kupplungszug passend für ARIENS 6900018 - 1

    Clutch Cable suitable for ARIENS 6900018

    Clutch cable suitable for ARIENS 6900018 To determine the exact spare part, please use the original spare part drawings of the corresponding appliance! Please be sure to observe the installation and...
  • Kupplungszug passend für MTD - 1

    Clutch cable suitable for MTD

    SKANA Clutch Cable replaces 746-04086 - Longueur totale: 1065mm ( 74604086 ) – replacement part for equipmentCompatibilityThis item is suitable for equipment from MTD (please check type and serial...
  • Gaszug passend für ECHO - 1

    Throttle cable suitable for ECHO

    Throttle cable with switch suitable for e.g. the following device(s): ECHO: PB770To determine the exact spare part, please use the original spare part drawings of the corresponding device!Please be...
  • Bowdenzug-Innenseele mit Öse Ø: 8,5 mm - 1

    Bowden cable - with eyelet Ø: 8.5 mm

    SKANA Inner Cable – replacement part for equipmentTechnical dataCable length: 2000mmSafetyFor safe installation and proper operation, please observe:the manufacturer's original installation...
  • Gaszug passend für SHINDAIWA - 1

    Throttle cable suitable for SHINDAIWA

    Throttle cable for trimmer suitable for e.g. the following device(s): SHINDAIWA: C270For the exact determination of the spare part, please use the original spare part drawings of the corresponding...
  • Zugfeder passend für AL-KO - 1

    Tension spring suitable for AL-KO

    Extension spring for gearbox (KST) suitable for e.g. the following device(s): AL-KO: 520BRFor exact determination of the spare part, please use the original spare part drawings of the corresponding...