Universal Water Pump Attachment for Brush Cutters

Universal Water Pump Attachment for Brush Cutters and Grass Trimmers

Convert many brush cutters and grass trimmers with a straight drive shaft into a powerful water pump. Ideal for pumping clean or slightly contaminated water without the need for an external power supply.

The robust gearbox ensures reliable power transmission. Five shaft tube adapter sleeves and a drive shaft identification template are included.

Technical data

• Flow rate: up to 300 l/min at 7,000 rpm
• Maximum head: up to 12 m
• Suitable for clean and slightly contaminated water
• Adapter sleeves for shaft tubes Ø 24.0 to 27.0 mm (28.0 mm housing)
• Drive shaft identification template included

Assembly in five steps

1. Remove the brush cutter gearbox and inspect the shaft tube.
2. Select the correct adapter sleeve.
3. Use the template to identify and install the correct shaft adapter.
4. Mount the pump attachment.
5. Connect 1" suction and discharge hoses.

Note

A suitable shaft adapter is required and is not included. It can be identified using the supplied drive shaft template.

Please check the model and serial number to ensure the correct part is selected.

Safety

• Follow the manufacturer's original installation instructions.
• Observe the safety and maintenance instructions.
• Installation and servicing by qualified personnel only.

Note

Verify the part number, model and serial number before ordering to avoid incorrect orders.