Universal Pole Pruner Attachment for Brush Cutters

Universal Pole Pruner Attachment for Brush Cutters and Grass Trimmers

Convert many brush cutters and grass trimmers with a straight drive shaft into a powerful pole pruner for the safe pruning of high branches – without the need for a ladder.

The cutting head can be adjusted from 0° to 70° in 5° increments and securely locked in position. Equipped with an OREGON guide bar (10" / 25 cm) and an OREGON 1/4" SC saw chain, the pole pruner delivers precise cuts and excellent cutting performance. The adjustable oil pump ensures optimum chain lubrication.

Technical data

• Cutting angle: 0° to 70° (5° increments)
• Guide bar: OREGON 10" / 25 cm (100SDAA041)
• Saw chain: OREGON 25AP058, 1/4", 1.3 mm, 58 DL
• Chain speed: 15.5 m/s at 8,000 rpm
• Adjustable oil pump
• Adapter sleeves for shaft tubes Ø 24.0 to 27.0 mm (28.0 mm housing)
• Drive shaft identification template and guide bar cover included

Note

A suitable shaft adapter is required for installation and is not included. The correct adapter can be identified using the supplied drive shaft template.

Please check the model and serial number to ensure the correct part is selected.

Safety

• Follow the manufacturer's original installation instructions.
• Observe the safety and maintenance instructions for the respective machine.
• Installation and servicing must be carried out by qualified personnel.

Note

Verify the part number, model and serial number before ordering to avoid incorrect orders.